NO RESERVE AUCTION - 3 STEEL SLITTING LINES: R-L 24" BROOKES SLITTING LINE, R-L 28" SLITTING LINE & R-L 53" WEAN REMOVABLE HD SLITTING LINE

Auction type

Timed Online Auction

Starts

Tue, 10 Jul 2012 12:00:00 GMT

Ends

Tue, 10 Jul 2012 12:00:00 GMT

Location

USA

**R-L WEAN 53'' REMOVABLE HD. SLITTER:** 65hp GE DC Motor @ 850/2550rpm; 6'' Arbor diameter w/ Keyways; Driven Knife Speeds = 216 & 650fpm using an 11'' Dia. Knife; Cutting Capacity: 20 Cuts of 18ga. Mild steel/ 3 Cuts of 7ga. Mild steel; Entry Side Guide Unit: Two Frames; one per each side of the incoming strip; each containing (3) vertically held rotatable rolls and adjustable to make contact with the strip edges; Two motor driven 6'' dia. Pinch rolls

NO RESERVE AUCTION - METAL PROCESSING EQUIPMENT: R-L  24" BROOKES SLITTING LINE, R - L 28" SLITTING LINE & R - L 53" WEAN REMOVABLE HD SLITTING LINE

**R-L Wean 53" Removable HD. Slitter:** Driven and Pull-thru w/ Overrunning Clutches; 65hp GE DC Motor @ 850/2550rpm connected to an Intermediate Nuttall Gear Reducer of 11.3 Ratio; 6" Arbor diameter w/ Keyways; Driven Knife Speeds = 216 & 650fpm using an 11" Dia. Knife; Pull-Thru speeds dependent on recoiler drive system; Arbors vertically adjusted by overhead jackscrews; Outboard housing moved into and out of arbors by hand wheel and connected machine screw.

**Cutting Capacity:** 20 Cuts of 18ga. Mild steel/ 3 Cuts of 7ga. Mild steel (Customer to determine speeds for different gauges and number of cuts)

**Entry Side Guide Unit:** Two Frames, one per each side of the incoming strip, each containing (3) vertically held rotatable rolls and adjustable to make contact with the strip edges; Two motor driven 6" dia. Pinch rolls; Upper roll raised and lowered by cylinders; Entry pass line roll by customer if required

**R-L 28" Slitter:** Driven and Pull-thru w/ Overrunning Clutches; 75hp U.S. DC Motor @ 850 coupled to an intermediate Foote-Jones gear reducer @ 3.375:1 ratio; 4 ½" arbor(s) dia. W/ keyways; Pull-thru speed dependent on recoiler drive systems; Upper Arbor vertically adjusted by overhead jackscrews; Outboard housing moved into and out of arbors by hand wheel and connecting screw

**Cutting Capacity:** 20 Cuts of .060" Mild steel/ 3 Cuts of .187" Mild steel (Customer to determine speeds for different gauges and number of cuts)

**Entry Side Guide Unit:** Pressure pads, upper pad manually adjustable; Two Frames, one per each side of the incoming strip, each containing (2) vertically held rotatable rolls and adjustable to make contact with the strip edges

**R-L Coil Tech Recoiler:** 16" drum x 30" face; 10k capacity; Manual expand, collapse and gripping; Emerson 40hp DC motor @ 850/2550rpm coupled to an intermediate; Foote-Jones Gear reducer @ 7.59:1 Ratio: Minimum bare drum running speed – 469fpm; Cylinder operated overarm separator unit; Tooling bar w/6" diameter separator discs and 4" diameter spacers; Pusher plate hydraulically

**Transfer Horn:** Single arm horn; 10k capacity x 30" wide; manually rotated; hydraulic push off plate; horn is raised and lowered hydraulically